| 參考價 | 面議 |
pl2210系列二極管泵浦皮秒Nd：YAG激光器產品簡介:短脈寬、高能量，高達2kHz的重復率和優良的脈沖穩定性進行pl2210系列二極管泵浦皮秒激光器的許多應用的，如材料加工、激光光譜學、光學參量發生器泵和其他任務
pl2210系列二極管泵浦皮秒Nd：YAG激光器
產品簡介:
短脈寬、高能量，高達2 kHz的重復率和優良的脈沖穩定性進行pl2210系列二極管泵浦皮秒激光器的許多應用的，如材料加工、激光光譜學、光學參量發生器泵和其他任務。
產品特點：
產品應用：
規格：
| 型號 | PL2210 | PL2210A | PL2210B | PL2210B-TR | PL2210C | |
| 輸出功率 | ||||||
| at 1064 nm | 0.4 mJ | 0.9 mJ | 2.5 mJ | 2.5 mJ at 1 kHz | 2.5 mJ / 5 mJ | |
| at 532 nm2) | 0.2 mJ | 0.45 mJ | 1.3 mJ | - | 1.3 mJ / 2.5 mJ | |
| at 355 nm3) | 0.11 mJ | 0.3 mJ | 0.8 mJ | - | 0.8 mJ / 1.3 mJ | |
| at 266 nm4) | 0.05 mJ | 0.15 mJ | 0.5 mJ | - | 0.5 mJ / 0.8 mJ | |
| 脈沖能量穩定(Std. Dev)5) | ||||||
| at 1064 nm | 0.5 % | |||||
| at 532 nm | 0.8 % | #colspan# | ||||
| at 355 nm | 1 % | |||||
| at 266 nm | 2.5 % | |||||
| 脈沖持續時間(FWHM) 6) | 25±2 ps | 25±2 ps | 80±8 ps | 100±10 ps | 25±2 ps / 80±8 ps | |
| 脈寬穩定性 7) | ±1 ps | ±1 ps | ±3 ps | ±3 ps | ±1 ps / ±3 ps | |
| 脈沖重復率 8) | 1 or 2 kHz | 1 kHz | 1 kHz / 1 MHz | 1 kHz | ||
| 觸發模式 | internal/external | |||||
| 典型的同步輸出脈沖延遲9) 10) | -500...50 ns | |||||
| 同步輸出脈沖抖動(Std. Dev) | <0.1 ns rms | |||||
| 空間模式11) | TEM00 | |||||
| 光束發散角12) | <1.6 mrad | |||||
| 光斑直徑 13) | ~3 mm | |||||
| 光束指向穩定性 14) | <30 μrad | |||||
| 脈沖對比度 | >200:1 | |||||
| 極化 | linear, >100:1 | |||||
| 物理特性 | ||||||
| Laser head size (W x L x H), mm 15) | 455 x 1035 x 242 | 455x1235x242 mm | ||||
| 電源尺寸(W x L x H), mm | 365 x392 x 290 | 475 x 460 x 290 | 365x285x360 mm | |||
| 操作要求 | ||||||
| 冷卻水 | 沒要求，空氣冷卻 | |||||
| 相對濕度 | 10-80 % (non condensing) | |||||
| 環境溫度 | 22 ± 2 °C | |||||
| 電源要求 | 100-240 VAC, single phase, 50/60 Hz | |||||
| 功率消耗 16) | <0.5 kW | <1 kW | <1 kW | <2 kW | <1.5 kW | |
1) Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 1064 nm.
2) For PL2210x-SH and PL22210x-SH/FH options. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
3) For PL2210x-TH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
4) For PL2210x-SH/FH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.
5) Averaged from 300 pulses at 1 kHz pulse repetition rate.
6) Optional 80±8 ps duration.
7) Measured over 1 hour period when ambient temperature variation is less than ±2 °C.
8) Should be specified when ordering. Inquire for custom pulse repetition rates.
9) In respect to optical pulse. <10 ps rms jitter is provided with PRETRIG option.
10) SYNC OUT lead or delay can be adjusted with 0.25 ns steps in specified range.
11) Gaussian fit >90%.
12) Full angle measured at the 1/e2 point at 1064 nm .
13) Beam diameter is measured at 1064 nm at the 1/e2 point.
14) Rms value measured from 300 shots.
15) 455×1235×250 mm (W×L×H) laser head size might be required for some optional configurations.
16) At 1 kHz pulse repetition rate.
Options
| 型號 | PL2210 | PL2210A |
| 脈沖能量1) | 0.7 mJ | 1.2 mJ |
| 脈沖持續時間(FWHM) | <80 ps | |
*At 1064 nm
光束輪廓
圖1 典型的近pl2210系列激光束剖面
外形圖：
|
|
|
|
|
|
*您想獲取產品的資料：
個人信息：
