路博LB-70c煙氣監測(CEMS)
青島路博環?？萍脊?/span>
***********************
研發生產：煙塵煙氣分析儀，氣體檢測儀，輻射儀，聲級計，各類環境類環保類檢測儀。
進口煙氣類產品：菲索煙氣總代、斯?fàn)栴D煙氣總代、英國凱恩、德國德圖、法國凱茂。
進口氣體類產品：華瑞、英思科、梅思安、BW、英國離子、新宇宙、霍尼韋爾。等等
燃?xì)夤芫W(wǎng)類設備：激光甲烷遙距儀、綜合燃?xì)夤芫W(wǎng)巡檢儀、德國豎威、舒賜、東京瓦斯、雷迪、杰恩
***********************
用途
采用皮托管等速采樣重量法采集煙道中的顆粒物，定位電解法測定煙道中的有害氣體，干濕球法測定煙道中的含濕量?？蓮V泛應用于環境監測、勞動保護、工業衛生、廠礦企業等部門進行管道污染源中的顆粒物采樣和有害氣體濃度采樣，也可應用于煙氣連續測量?jī)x器準確度的評估和校準。
三、性能特點
1、一機多用，可測量煙塵、含濕量、流速、動壓、靜壓、煙溫、油煙、煙氣（如 O2,SO2，NO,NO2，CO,CO2，H2S）等參數。
2、 交直流兩用，選配大容量ZD-12型直流電源箱，可在無交流電源場合工作，工作時間大于8小時。
3、 配備智能煙氣預處理器，可對煙道中的煙氣進行濾塵加熱脫水等處理，使測量數據更加準確，保證儀器更加安全。
4、 自動儲存監測數據，供查詢、打印，數據存儲能力1萬組，可使用微型打印機連接RS232接口現場打印采樣報表，也可使用USB存儲器或存儲卡存儲，連接電腦打印采樣報表。
5、 自動記憶上次輸入的監測參數，下次開機優先使用，實現一鍵采樣。
6、 *的干燥、過濾、防倒吸三合一設計的干燥筒，可以高效干燥濕氣、過濾粉塵以及放倒吸減小對流量的影響，實現*運轉免清洗。
7、 寬溫液晶顯示，可調背光及亮度，中文人機對話方式菜單顯示，圖文并茂，簡單明了，用戶憑借儀器豐富的在線操作提示，直接操作。
8、 多級光電隔離，多CPU容錯結構，克服靜電干擾及靜電擊穿。
9、 廢氣上排式設計，有效解決下排氣造成的堵塞及廢氣排在儀器內對儀器造成的損害。
10、自動修正溫度及壓力等參數，標況數據可直接讀出，并且有斷電保護功能，來電后自動進入停電前采樣狀態。
11、可通過防水鍵盤直接對儀器的各項參數進行線性標定，儀器維護及標定必須輸入密碼，保證儀器參數安全。
12、*風冷系統，當儀器內溫度高于設定溫度自動開啟風冷系統，保證儀器正常工作。
13、實時顯示直讀動壓、靜壓、溫度、煙溫、流速、流量、轉速、含濕量等參數，自動測量大氣壓。
14、采用進口壓力傳感器及進口電化學傳感器測量結果更加準確。電化學傳感器與信號模塊一體化設計，更換傳感器不需標定，且具有溫度及線性補償和交叉干擾修正功能，保證測試準確性。
15、采用耐腐蝕大流量可調速煙塵采樣泵與電子流量計，反應快，跟蹤效率高，煙氣管路采用四氯乙烯管路無吸附，采用電子流量計恒流采樣，保證了測量結果的準確性。
16、儀器內裝可充電電池，供交流停電時保存數據交流來電時自動恢復采樣，自動扣除采樣過程中的掉電時間，并可供用戶查詢掉電時間。
路博LB-70c煙氣監測(CEMS)
煙氣部分技術指標 |
煙氣采樣流量 | 0.1L/min~2L/min,出廠設置1 L/min |
O2 | (0～30)% | 0.1% | 示值誤差：
優于±2.5 %；
重復性：≤2.0 %；
響應時間：≤90s；
穩定性：1小時內
示值變化≤5.0 %。
（煙氣部分均為選配件） |
SO2 | (0～5700/zui大示值14000)mg/m3 | 1mg/m3 |
NO | (0～1300/zui大示值6700)mg/m3 | 1mg/m3 |
NO2 | (0～200/zui大示值2000)mg/m3 | 1mg/m3 |
CO | (0～5000/zui大示值25 00)mg/m3 | 1mg/m3 |
CO2 | (0～20)% | 0.01% |
H2S | (0～300/zui大示值1500)mg/m3 | 1mg/m3 |
煙氣傳感器使用壽命 | 空氣中約3年 |
工作電源 | AC220V±10% 50Hz或DC12V (選配) |
噪聲 | < 65dB(A) |
功耗 | <100W |
整機重量 | 約9kg, |
路博LB-70c煙氣監測(CEMS)
use
The particles in the flue were collected by the Pitot tube constant velocity sampling method. The harmful gases in the flue were determined by the location electrolysis method, and the moisture content in the flue was measured by the wet and dry ball method. It can be widely used in environmental monitoring, labor protection, industrial hygiene, factories and mines and other departments to carry out pipeline pollution sources in the sampling of particulate matter and harmful gas concentration sampling can also be applied to the continuous measurement of flue gas equipment, the accuracy of the assessment and calibration.
Third, the performance characteristics
(Such as O2, SO2, NO, NO2, CO, CO2, H2S) and other parameters. It can be used to measure soot, moisture content, flow rate, dynamic pressure, static pressure, smoke temperature, soot, flue gas (such as O2, SO2, NO, NO2, CO, CO2, H2S)
2, AC and DC, optional large capacity ZD-12 DC power box, can work in the absence of AC power, working time is greater than 8 hours.
3, equipped with inligent flue gas pre-processor, flue gas in the flue dust filter dehydration and other treatment, so that the measurement data more accurate to ensure that the instrument more secure.
4, automatic storage of monitoring data for query, print, data storage capacity of 10,000 groups, you can use the micro-printer to connect the RS232 interface to print sampling reports, you can also use the USB memory or memory card storage, connect the computer to print the sampling report.
5, automatically remember the last input of the monitoring parameters, the next boot priority to use, to achieve a key sampling.
6, the unique dry, filter, anti-sucking three-in-one design of the drying cylinder, you can efficiently dry moisture, filter dust and put down the impact of small absorption on the flow, to achieve long-term operation without cleaning.
7, wide temperature LCD display, adjustable backlight and brightness, the Chinese man-machine dialogue mode menu display, illustrated, simple and clear, the user by virtue of the instrument rich online operation tips, direct operation.
8, multi-level photoelectric isolation, multi-CPU fault-tolerant structure, to overcome electrostatic interference and electrostatic breakdown.
9, exhaust on the row of design, an effective solution to the exhaust caused by the blockage and exhaust emissions in the instrument caused damage to the instrument.
10, automatically correct the temperature and pressure parameters, standard data can be directly read out, and a power protection function, after the call automatically into the power before the sampling state.
11, through the waterproof keyboard directly on the parameters of the instrument calibration, instrument maintenance and calibration must enter the password to ensure the safety of instrument parameters.
12, a unique air-cooled system, when the temperature inside the instrument is higher than the set temperature automatically open air-cooled system to ensure that the instrument work properly.
13, real-time display direct reading dynamic pressure, static pressure, temperature, smoke temperature, flow rate, flow, speed, moisture content and other parameters, automatic measurement of atmospheric pressure.
14, the use of imported pressure sensors and imported electrochemical sensor measurement results more accurate. Electrochemical sensor and signal module integrated design, replacement sensor without calibration, and has a temperature and linear compensation and cross-interference correction function to ensure the test accuracy.
15, the use of corrosion-resistant large flow adjustable speed smoke sampling pump and electronic flowmeter, fast response, high tracking efficiency, flue gas pipeline without tetrafluoroethylene pipeline without adsorption, the use of electronic flowmeter constant current sampling to ensure that the measurement results The accuracy of the.
16, the instrument built-in rechargeable battery, for the exchange of power to save data exchange calls automatically resume sampling, automatically deducted during the sampling process power-down time, and for users to check the power-down time.
